Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Farm & ranch
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Los Feliz
Gate installation in Los Feliz almost always starts at the HOA office, not the driveway. Most of this neighborhood falls under architectural review, and the committee wants to see drawings, finish samples, and setback measurements before you dig a single post hole. We know that process because we file those packets regularly, and we’ve learned which details get approved and which get sent back. A new driveway gate or pedestrian gate in Los Feliz typically runs $3,800-$9,500 installed, depending on width, material, and whether the lot is flat or part of the hillside grading above Franklin Avenue. Call (626) 624-4196 and we’ll walk the property, measure the grade, and hand you a written price before any work starts.
Why Vance Gate Repair Is Los Feliz’s Preferred Gate Installation Company
Los Feliz gates are rarely off-the-shelf. The housing stock runs to 1920s and 1930s Spanish Colonial Revival and Mediterranean Revival estates, many with original hand-forged ironwork that an HOA will not let you replace with a modern aluminum panel. We fabricate and weld. When a committee requires the new gate to match the 1936 original next door, we can do that, because our installers are also welders and metal fabricators, not just panel bolters.
Our local reputation in Los Feliz is built on the hillside work. Properties above Los Feliz Boulevard and up into the Los Feliz Hills sit on steep lots where a standard residential gate motor stalls under the weight of ornamental iron. We lead with high-torque operators on those jobs, and we explain why before the install, not after a burnout. You get a written scope, a written price, and a photo record of the finished work, every job, no exceptions.
Response time to Los Feliz is same-day for gate failures and next-day for most new installation walkthroughs. A live person answers the phone around the clock at (626) 624-4196, so you’re never leaving a message and waiting for a callback when your gate is stuck open at midnight.
Our Gate Installation Services in Los Feliz
Driveway Gate Installation
Driveway gates in Los Feliz range from modest steel tube frames on Vermont Avenue flats to heavy custom ironwork on Los Feliz Boulevard estates. The flat lots are straightforward. The hillside lots above Franklin Avenue are not, and we treat them differently from the first measurement. A driveway gate on grade requires a slope-rated operator, deeper post footings below the expansive clay line, and often a fabricated hinge post rather than a stock bracket. Los Feliz driveway gate installations typically run $4,200-$9,500 depending on gate width and whether we’re adding an opener.
Pedestrian Gate Installation
Pedestrian gates in Los Feliz often sit at the edge of a front garden wall under a mature oak or sycamore canopy. The gate itself is usually matched to the driveway gate’s ironwork, which means custom fabrication. We measure, fabricate, prime, and powder-coat to match existing hardware. A pedestrian gate with matching ironwork and self-closing hinges runs $1,800-$3,400 in Los Feliz. If the HOA requires a specific latch style or finish, we note it on the written quote before ordering steel.
Sliding Gate Installation
Sliding gates show up on narrower Los Feliz lots where a swing gate would arc over the sidewalk or into the neighbor’s hedge. The hillside sections of Los Feliz rarely have room for a slide track without retaining-wall work, so we see more sliding gates on the flatter streets south of Franklin and along Hillhurst Avenue. A Los Feliz sliding gate with a steel track, V-groove wheels, and an operator runs $5,500-$11,000. Dirt and chaparral debris from Griffith Park’s slopes are the main maintenance issue; we set the track on a raised concrete curb to keep it clear.
Swing Gate Installation
Swing gates are the signature Los Feliz gate: wide, iron, heavy, and usually on a sloped driveway. This is the job we do more than any other in this neighborhood. Gate Installation of this type requires a properly engineered post footing and a high-torque operator, because the gate’s momentum on a 12% grade multiplies the load the motor sees. We use commercial-grade openers on Los Feliz swing gates as the baseline, not the upgrade. A typical double swing gate in the Los Feliz Hills runs $6,000-$12,000 installed, including the operator and safety photo-eyes.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Los Feliz
We install and service operators from LiftMaster, FAAC, BFT, and Linear, and we stock common parts for those brands so a Los Feliz repair doesn’t wait on a distributor shipment. If your existing gate already has a compatible operator, we’ll often reuse it when it’s in good condition and sized correctly for the gate. On hillside driveways in Los Feliz, a residential LiftMaster that worked fine on a flat Burbank lot is frequently under-spec, and we’ll tell you that plainly. We’d rather install one FAAC or BFT operator that holds the gate than replace a burned motor twice.
Common Gate Installation Problems We See in Los Feliz Homes
- HOA architectural committee rejections. Los Feliz HOAs, particularly in historic districts and gated enclaves like Laughlin Park, routinely reject standard panel replacements. The fix is custom fabrication that matches the original ironwork, and we handle the drawings and material samples as part of the quote.
- Operators stalling on hillside driveways. The steep lots above Franklin Avenue and in the Los Feliz Hills regularly kill residential swing-gate motors. A 400-pound wrought-iron gate on a 10-degree slope behaves like a much heavier gate on the motor. High-torque, slope-rated actuators are the baseline here.
- Post footings shifting in expansive clay. Los Feliz sits on clay soils that swell in wet winters and shrink in dry summers. Shallow footings shift, hinges bind, and gates that closed cleanly in April are dragging by September. We set post footings below the active clay line and use larger diameter concrete cores than flat-terrain installs require.
- Ground-contact rust on hillside gates. Ornamental iron gates on Los Feliz hillsides sit close to soil that holds moisture against the bottom rail. We see rust-through at the lower hinge stile and the bottom pickets on 1920s originals. Our fabrication work includes reinforcing those sections with new steel rather than patching with filler.
Pricing for Gate Installation in Los Feliz, CA
Los Feliz gate installation pricing runs higher than the Los Angeles metro average because the work is heavier. Here are the numbers we quote most often. A pedestrian gate with matching ironwork: $1,800-$3,400. A single swing driveway gate with operator: $4,200-$7,800. A double swing gate on a hillside lot with high-torque operator: $6,000-$12,000. A sliding gate with track and operator: $5,500-$11,000. What moves the price within those ranges is gate width, ironwork complexity, post footing depth, and whether the HOA requires specific finishes or hardware. Every quote is written and handed to you before any work starts. Every quote includes the documented photo record and the 365-Day Done Right Promise. Call (626) 624-4196 for a free measurement and written estimate.
We Also Serve Cities Near Los Feliz
Our crews cover Los Feliz daily, and we also install gates in Pasadena, Altadena, Highland Park, and La Cañada Flintridge. If you’re on the edge of Los Feliz near the Glendale border or up toward the 2 freeway, Los Feliz is our home service area and we’ll schedule around your HOA meeting, not the other way around.
Serving Los Feliz, CA - Our Local Coverage Area
We’re based in the Los Feliz area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Los Feliz
Yes, in nearly every Los Feliz neighborhood with an HOA or architectural review committee, you will need written approval before installing a new gate. Los Feliz HOAs commonly require drawings, finish samples, setback dimensions, and sometimes a photo of the proposed gate against the existing house. We prepare and submit that packet for you as part of the installation quote. Call (626) 624-4196 and we’ll tell you what your specific committee typically asks for.
Yes, and this is the most common job we do in the Los Feliz Hills. Steep driveways require a slope-rated, high-torque operator sized for the gate’s actual weight and the grade angle, not the gate’s flat-ground weight. We install FAAC and BFT high-torque operators on hillside driveways above Franklin Avenue regularly.
Laughlin Park and other gated Los Feliz enclaves have shared perimeter gates owned by the HOA, not by an individual homeowner. That changes the job: the management company or board has to approve the work, and access systems often need to integrate with existing resident keypads, fobs, or vehicle detection loops. We coordinate directly with the management company and the board, and we document every adjustment with photos so the next technician isn’t guessing. Call (626) 624-4196 and we’ll review the shared system before quoting.
Solar gate openers make sense on Los Feliz hillside properties where running 120-volt power to the gate post means trenching through mature landscaping or cutting across a steep slope. A solar setup with a deep-cycle battery and a 20-watt panel typically adds $900-$1,700 to the install. If AC power is already at the post, we use that instead. We’ll show you both options and the number for each before you decide.
Yes, sliding gates are often the right choice for narrow Los Feliz lots where a swing gate would arc across the sidewalk or into the street. The flat streets south of Franklin Avenue and around Hillhurst have the most sliding-gate installs. On a hillside lot, a sliding gate usually needs a retaining wall or a raised track, which adds to the job scope, and we’ll include that in the written quote up front. Call (626) 624-4196 for a measurement and a number you can take to the HOA.
Get Your Gate Installation Started in Los Feliz
We know Los Feliz gates because we work on the steep ones, the iron ones, and the ones an HOA won’t let you change without a fight. Call (626) 624-4196 for a free measurement and a written estimate. You’ll get a price in writing before any work starts, a documented photo record when the job is done, and a full year under the Done Right Promise if anything needs adjusting.
Written by Adrian Vance, owner at Vance Gate Repair, serving Los Feliz gate installation and repair since 2014.
Gate Installation in Nearby Areas