Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Farm & ranch
Before
After
Before
After
Before
AfterGate Repair in Altadena, CA
Gate access control in Altadena has to be built for foothill conditions: Santa Ana gusts that shift gate frames, electrical service that’s been exposed to wildfire ash and heat, and a housing stock that runs from 1920s bungalows to North Altadena ranch properties with pipe-frame gates on gravel roads. Most jobs we see involve automating an older gate, repairing a keypad or intercom that stopped reading, or restoring access control after a post-Eaton Fire rebuild. Call (626) 624-4196 and a live person answers, day or night.
Why Altadena Homes Are Different
Altadena sits directly against the San Gabriel Mountain front, which means wind. Real wind. During Santa Ana and Diablo events, sustained gusts bend gate frames, strip hinges out of aging posts, and knock automatic opener arms out of alignment far more often than in Pasadena or the flatland communities below. We see gates that worked fine in August and won’t close in October because the frame has moved half an inch and the photo-eye no longer lines up. The housing stock compounds it: 1920s to 1950s Craftsman and Spanish Colonial Revival homes still fitted with original wrought iron or wood driveway gates whose hardware has corroded or settled over decades. And on the northern end, horse-keeping properties along gravel access roads often have large pipe-frame ranch gates that were never automated at all. Post-Eaton Fire rebuilds in LA County’s Very High Fire Hazard Severity Zone have added another layer: permits, setbacks, and materials all run through LA County Building and Safety, not a city hall, and that’s a permitting pathway most gate contractors from neighboring cities have never worked under. When we quote a gate job in Altadena, we account for wind exposure, post condition, and the current county code, because all three change the work.
Our Main Altadena Services
Altadena homeowners call us most often for three things: fixing a gate that no longer opens or closes reliably, installing a gate on a rebuilt or remodeled lot, and bringing motors and openers back into adjustment after wind or age has taken its toll. Each has its own page on this site with full pricing and job details.
Gate Repair in Altadena
Repair work here is dominated by wind damage and decades-old hardware. Hinges seize, gate leaves sag, and opener arms bend out of alignment. We document what we find, quote the repair in writing before starting, and leave a photo record of every adjustment and part number. Gate Repair in Altadena covers the common repairs and their price ranges.
Gate Installation in Altadena
New gates in Altadena are increasingly tied to post-fire rebuilds, which means the installation has to satisfy LA County Building and Safety, not a city hall. That affects post depth, gate weight, setback, and sometimes the choice between steel and aluminum. Gate Installation in Altadena walks through what a compliant install involves and what it costs.
Gate Motor & Opener in Altadena
Wind is the motor’s enemy up here. Opener arms get knocked out of travel, limit switches drift, and control boards take surge damage during high-wind power flickers. We service nine major automation brands, so we repair what’s on the property rather than steering you toward a replacement. Gate Motor & Opener in Altadena covers repair and replacement pricing by brand.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Altadena
Access control in Altadena means keypads, intercoms, phone entry, card readers, and the wiring that connects them, and the local conditions are unforgiving: 1920s to 1960s homes where original gate wiring was never conduit-rated for foothill heat and post-Eaton Fire rebuilds where new systems must meet LA County’s current code. The specific problem we solve most often in Altadena is a keypad or intercom that works intermittently because wind-driven rain has gotten into the housing, or because the wiring run from house to gate has cracked insulation. This page describes what we do under our broader Gate Access Control service line.
Keypad Entry
Signs you need it
The keypad reads some codes but not others, lights up without opening the gate, or stops responding after rain or high wind.
What it costs in Altadena
Keypad replacement in Altadena runs from $185 to $520, with the higher end covering hardwired models and runs to a detached post.
How we do it
We check the wiring run first, then test the keypad at the unit, replace it if needed, program the codes, and photograph the final wiring and installed unit.
Video Intercom
Signs you need it
The video feed is black, audio is one-way, or the call button rings the house but never unlocks the gate.
What it costs in Altadena
Video intercom replacement or repair in Altadena runs from $450 to $1,600, with Wi-Fi and multi-tenant units at the top end.
How we do it
We trace the power and data lines, isolate the failed component, replace or re-terminate it, and leave a written record of the unit’s model and settings.
What Gate Access Control Costs in Altadena
| Item | Typical range in Altadena |
|---|---|
| Keypad replacement | $185 - $520 |
| Video intercom replacement | $450 - $1,600 |
| Card reader system entry | $350 - $1,200 |
Can you add a keypad to an existing Altadena gate without replacing the opener?
Yes, in most cases. We match the keypad to the existing opener’s receiver protocol, so the gate motor stays in place. Wind-exposed gates sometimes need a fresh run of low-voltage wire, which we quote in writing before starting. Call (626) 624-4196 to schedule a look.
Does Altadena require a permit for adding gate access control?
Low-voltage keypad and intercom work generally doesn’t need a permit, but any changes to the gate controller’s power supply may. On post-fire rebuild properties, we check the LA County Building and Safety requirements before quoting. Estimates are free.
Gate Parts & Welding in Altadena
Gate parts and welding in Altadena is about restoring what wind and time have moved or broken: hinges torn from posts, sagging frames, rusted rails, and pipe gates that need a section cut out and new steel welded in. The housing era matters here because most Altadena gates were built with materials that are no longer stocked by big-box suppliers, so off-the-shelf replacements rarely fit. Our Gate Parts & Welding service includes sourcing or fabricating the part, not just patching around it.
Hinge Replacement
Signs you need it
The gate sags, scrapes against the driveway, or the hinge pin has worn visibly oval.
What it costs in Altadena
Hinge replacement in Altadena runs from $120 to $420 per hinge, with the higher end covering heavy steel plate hinges on horse-property gates.
How we do it
We cut or unbolt the old hinge, plate the post if it’s torn, weld or bolt the new hinge, and load-test the gate before we photograph the finished work.
Post Replacement
Signs you need it
The post leans, the concrete base is cracked, or the gate no longer meets the latch because the post has moved.
What it costs in Altadena
Post replacement in Altadena runs from $380 to $900 per post, including demolition of the old footing, new concrete, and resetting the gate.
How we do it
We dig out the old footing, set the new post in concrete at the correct depth for Altadena wind load, and remount the gate once the concrete cures.
What Gate Parts & Welding Costs in Altadena
| Item | Typical range in Altadena |
|---|---|
| Hinge replacement | $120 - $420 per hinge |
| Gate roller replacement | $90 - $260 per roller |
| Custom steel welding repair | $180 - $800 |
Can you weld a broken wrought iron gate in place, or does it need to come off?
Most repairs can be done in place, with the gate held square while we weld. If the break is at the hinge post and the post is damaged, the gate comes off and the post gets plated or replaced. We quote that before starting.
Are replacement parts hard to find for old Altadena gates?
Often, yes. 1920s through 1950s gates in Altadena frequently use hinge pins, latch bars, and rail profiles that aren’t made anymore. We fabricate replacement steel parts in-house rather than forcing a universal part that fails in the next Santa Ana. Call (626) 624-4196 for a written quote.
Brands We Service in Altadena
We service LiftMaster, FAAC, BFT, and Linear operators in Altadena, along with five other major brands, and we keep common control boards and receiver parts in local van stock. See our brands for the full list and turnaround details.
Pricing for Gate Repair in Altadena, CA
| Service | Typical range in Altadena |
|---|---|
| Keypad replacement | $185 - $520 |
| Video intercom replacement | $450 - $1,600 |
| Card reader entry | $350 - $1,200 |
| Hinge replacement | $120 - $420 per hinge |
| Gate roller replacement | $90 - $260 per roller |
| Post replacement | $380 - $900 per post |
| Custom steel welding repair | $180 - $800 |
| Gate opener repair | $160 - $700 |
In Altadena, price gets pushed up most often by wind damage that has warped the frame or the post, and by old wiring that has to be replaced rather than spliced. Every quote is written and handed to you before any work begins, so the price you approve is the price you pay.
Neighborhoods We Serve in Altadena
We run crews across all of Altadena, including these representative neighborhoods:
- North Altadena and the equestrian-zoned properties off Lincoln Avenue
- The Meadows and the mid-century streets west of Lake Avenue
- President Streets and the Craftsman bungalow blocks east of Fair Oaks
- Altadena’s foothill streets below the Chaney Trail area
- Janes Village and the historic homes near Farnsworth Park
Response time in Altadena is typically same-day for most repairs, and a live person answers the phone 24/7 at (626) 624-4196.
Service Area - Cities Near Altadena
We also serve Pasadena, CA, San Gabriel, CA, Alhambra, CA, and Arcadia, CA. If you’re in an adjacent community, call (626) 624-4196 and we’ll confirm coverage directly.
Serving Altadena, CA - Our Local Coverage Area
We’re based in the Altadena area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Altadena
Most Altadena repairs are handled same-day, with dispatch coordinated from our Los Angeles office. A live person answers the phone 24/7, so you’ll know when a technician is headed your way and who it is before they arrive.
Many repairs don’t, but structural work like post replacement and any installation on a post-Eaton Fire rebuild lot may. We check the current LA County Building and Safety requirements as part of the written quote, so you’re not surprised later.
Yes. Every job gets a written scope and a written price before any tool is picked up. That’s part of the Haven Standard we follow on every visit, and it applies to all gate repair and access control work in Altadena. Call (626) 624-4196 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Altadena Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.