Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Farm & ranch
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across North Hollywood
Gate installation in North Hollywood runs between $1,800 and $6,500 for most residential jobs, with driveway swing gates on the lower end and heavy sliding or wrought-iron double gates at the top. We typically schedule installation within 5 to 10 business days, and we always hand you a written price before any work begins. If you’re dealing with a failed apartment complex gate on Lankershim or a ranch home near Valley Glen that needs a new entry, call (626) 624-4196 and we’ll walk the site, measure it, and quote it in writing.
Why Vance Gate Repair Pasadena Is North Hollywood’s Preferred Gate Installation Company
North Hollywood’s gate stock is not like the rest of Los Angeles. The neighborhood’s post-WWII apartment blocks and ranch tract homes were built before automatic gates were standard, so most of what we install here is a retrofit: a gate added decades after the original framing, often on a driveway that was never engineered for the load. That’s the difference between a clean install and one that binds in August. We know which post footings hold in North Hollywood’s expansive clay soil, which operators survive a 108°F afternoon on Vineland, and which hinge setups actually carry a heavy wrought-iron double gate without sagging.
Every installation we complete in North Hollywood carries the same paperwork trail: a written scope, a written price, and a photographed record of what was set, what was wired, and what was installed. That’s how Adrian Vance has run the company since 2014, and it’s why our North Hollywood customers can show a future technician exactly what’s under the post cap instead of guessing.
We dispatch background-checked, uniformed technicians to every North Hollywood job, and you’ll get a name and photo before anyone arrives. No callback queue, no voicemail loop: a live person answers 24/7.
Our Gate Installation Services in North Hollywood
Driveway Gate Installation
A typical single driveway swing gate in North Hollywood runs $1,800 to $3,200 installed, including the operator, posts, and safety photo-eyes. Ranch homes east of Laurel Canyon often have wider driveways than the original builder planned for, which means a bi-parting setup or a heavier panel than the standard kit. We size the operator to the actual gate weight, not the brochure spec, because a wrought-iron panel on a 1990s-era hollow block post is a different job than a new steel frame on a fresh footing.
Pedestrian Gate Installation
Pedestrian gates in North Hollywood are common on ADU conversions and side-yard entries, especially on properties where the main driveway gate does not have a separate walk-through. These run $800 to $1,600 for a standard steel pedestrian gate with a keypad or card reader. If the gate needs to tie into an existing access control system, we can wire it to the same controller and log the entry separately.
Sliding Gate Installation
Sliding gates make sense on North Hollywood lots where a swing gate would block a carport or eat into a narrow side yard. Expect $2,500 to $5,500 for a single-track slide gate with a rack-and-pinion operator, depending on the gate length and whether we need to pour a new track bed. On ADU-converted ranch homes, we often see aftermarket slide gates where the rack was sized for a lighter panel, and the added weight of an ornate iron gate has stripped teeth off the pinion. We size both the rack and the motor to the actual panel weight.
Swing Gate Installation
Swing gates remain the most common install in North Hollywood, simply because the neighborhood’s driveways were built for them. A new single swing gate with a heat-rated operator runs $1,900 to $3,400; a double swing gate starts around $2,800 and tops out near $6,500 for heavy wrought iron. The detail that matters here is the post: a swing gate hung on a hollow block post with no rebar will bind and kill the operator within a few seasons. We set new footings with rebar and photograph the pour before the concrete cures.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in North Hollywood
We install and service operators from LiftMaster, FAAC, BFT, and Linear, and we stock common parts locally so a North Hollywood job doesn’t stall waiting on a shipped board. If you already have a working FAAC or BFT motor and you just need the gate itself replaced, we keep the existing controller when it makes sense and price the job accordingly. If the controller is a 1990s-era LiftMaster cooking on a west-facing post in July, we’ll tell you what it costs to replace it now versus nursing it another season, and the price goes in writing either way.
Common Gate Installation Problems We See in North Hollywood Homes
- Hollow block posts with no rebar. The late-’80s and ’90s apartment gate retrofits along Lankershim and Vineland were frequently bolted directly onto unreinforced block posts. Heat softens the grout, the post tilts, and the gate binds against the operator until the motor burns out.
- Operators sized for a lighter gate. Ornate wrought-iron gates add real weight. When the motor and rack were spec’d for a thin steel panel, the added load strips pinion teeth and fries capacitors. We weigh the gate and spec the operator to that number.
- Solar openers on shaded lots. North Hollywood has plenty of tree-shaded side yards and north-facing driveways where a solar gate opener never gets enough sun. The battery drains, and the gate dies during a Santa Ana event when it cannot move off its rollers. We calculate actual sun hours before recommending solar, and we’ll tell you honestly if AC power is the better call.
- Binding during afternoon heat peaks. Thermal expansion is real. A black iron gate on a 110°F day lengthens enough to bind in its track or against the post. We set clearances with that expansion factored in, not just the gap that looks right in the morning.
Last July, our crew replaced a gate operator on a Vineland Avenue apartment driveway where the old LiftMaster logic board fried during a 112°F afternoon and the tenant’s car was trapped mid-cycle. We found the original operator bolted to a hollow block post with no rebar – the post had leaned just enough to bind the swing gate and overload the motor. We set a new post footing with rebar, installed a heat-rated operator, and added a safety photocell so the gate won’t trap another vehicle.
Pricing for Gate Installation in North Hollywood, CA
Here are real ranges for North Hollywood, not national averages. A standard single driveway swing gate with operator: $1,800 to $3,200. A double swing gate in steel or light iron: $2,800 to $4,800. A heavy wrought-iron double gate with new footings: $4,500 to $6,500. A sliding gate with track bed and rack-and-pinion operator: $2,500 to $5,500. A pedestrian gate with keypad or card reader: $800 to $1,600. A solar gate opener added to existing panels: $900 to $1,800, depending on battery capacity and panel wattage.
What changes the price: post condition (hollow block versus engineered footings), gate weight and material, operator brand, and whether we’re reusing an existing controller or replacing it. You’ll get the exact number in writing before any work starts – that’s Haven Standard Clause 1, and it’s the same for a $900 pedestrian gate or a $6,500 double driveway install.
We Also Serve Cities Near North Hollywood
Our crews regularly cross into Sun Valley, Burbank, Tujunga, and Altadena for Gate Installation work. If you’re in any of those neighborhoods, the same written-price standard applies, and we’ll schedule around your gate’s actual failure mode, not a generic checklist. For full details on our North Hollywood coverage, see Gate Installation in North Hollywood.
Serving North Hollywood, CA - Our Local Coverage Area
We’re based in the North Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in North Hollywood
Because the operators were mounted on hollow block posts without rebar in the late ’80s and ’90s, and those posts have been tilting for 30 years. The Valley heat pushes the operator’s logic board past its thermal limit, but the board failure is usually the symptom, not the cause. The post tilts just enough to bind the gate, the motor strains, and the board cooks. We replace the footing, set new rebar, and install a heat-rated operator so the failure stops recurring. Call (626) 624-4196 if your tenants are blocked and you need it handled today.
A properly sized solar gate opener will hold up in North Hollywood heat, but only if the panel gets enough direct sun. On shady, tree-covered lots or north-facing drives, the battery never recovers and the gate fails exactly when you need it most. We measure actual sun exposure before recommending solar, and we size the battery for Santa Ana season, not a mild spring week. If the math does not work, we’ll tell you and price the AC run instead. Call (626) 624-4196 for a written solar feasibility quote.
Usually not. Heavy wrought-iron double gates need a reinforced footing; hanging that weight on an existing hollow block post is how the binding and motor burnout cycle begins. We can sometimes reuse a post if it is steel-reinforced and plumb, but the honest answer on most 1950s and 1960s North Hollywood ranch homes is that the old post is neither. We’ll quote the footing work as a line item so you see exactly what it costs. Call (626) 624-4196 and we’ll inspect the posts in person.
Heavy iron gates get blown off their rollers or forced open when the wind catches a bi-parting panel that is not properly balanced. The gate then jams mid-track or swings free and damages the operator arm. We install wind-rated rollers, set the opener’s force limits correctly, and add a mechanical stop where the gate needs one. If a Santa Ana already moved your gate, the repair is the same discipline as a new install: find the bind, fix the footing, reset the limits, and photograph everything.
Yes. We can keep the existing gate panel and retrofit a new controller with keypad or card reader support, even if the old motor is a 1990s-era unit with no accessory terminals. The job is usually $600 to $1,200 depending on the controller brand and whether we need to run new low-voltage wiring from the house to the gate. We’ll document the wiring change on the job record so the next technician sees exactly what was altered. Call (626) 624-4196 for a written quote.
Call Vance Gate Repair Pasadena for Gate Installation in North Hollywood
If you need a gate installed in North Hollywood, call (626) 624-4196. We’ll send a technician who knows the neighborhood’s post-footing history, its heat basin, and its apartment retrofits. You’ll get a written price before anything is ordered or dug, and a documented photo record when the job is done. No verbal estimates, no surprises, no gate that works until the first hot week and then gives up.
Written by Adrian Vance, Owner at Vance Gate Repair Pasadena, serving North Hollywood since 2014.
Gate Installation in Nearby Areas
