Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Farm & ranch
Before
After
Before
After
Before
AfterGate Repair in Pico Rivera, CA
Gate access control in Pico Rivera usually means retrofitting a 30-year-old wrought iron driveway gate with a keypad, card reader, or phone-entry system so it works with the property’s existing motor. Most calls we take here involve gates installed in the 1980s and 1990s, when the city’s postwar tract homes got their first steel slide and swing gates. The inland heat, settling concrete, and decades of daily use mean the access hardware fails in predictable ways: corroded keypad contacts, sun-baked wiring, and operators that no longer respond to remote signals. Call (626) 624-4196 and you’ll get a real person.
Why Pico Rivera Homes Are Different
Pico Rivera’s housing stock sets the tone for almost every gate job we do here. Most parcels are modest single-family homes built between the late 1940s and early 1970s, on standard 50 to 60-foot lots. The gates were almost never part of the original build. They arrived later, usually in the 1980s or 1990s, when homeowners added wrought iron slide gates and perimeter fencing to enclose front yards and driveways. Those gates are now 30 to 40 years old.
That age shows up as hinge fatigue, corroded weld joints, and electric operators that have outlived their design life. The concrete driveways have aged too. Many of Pico Rivera’s rolling gates ride on embedded bottom-track channels set into slabs poured decades ago, and as the slab settles or cracks, the track shifts and the gate derails. Summer temperatures regularly hit 95 to 100°F, which degrades rubber seals, warps aluminum frames, and pushes older operators past their thermal limits. Santa Ana winds knock loose slide gates off their rollers a few times every season. We see these problems in Pico Rivera at a rate we don’t see in neighboring cities where the housing stock and gates are newer.
Our Main Pico Rivera Services
Two services account for most of the calls we take in Pico Rivera, but these three pages cover the full scope of what we do locally.
Gate Repair in Pico Rivera
When a swing gate sags or a slide gate jumps its track on a Pico Rivera driveway, the fix usually comes down to the hinge or the roller. We repair steel and wrought iron gates across the city, from the residential streets around Rivera Park to the commercial yards along Washington Boulevard. The most common job is resetting a gate that’s tilted because the original weld joints have fatigued. We also replace broken hinges, re-seat derailed rollers, and correct operators that no longer cycle properly. Full details are on our Gate Repair in Pico Rivera page.
Gate Installation in Pico Rivera
New gate installations in Pico Rivera require working around the realities of older lots: narrower driveways, settled concrete, and set-back rules that vary by parcel. We measure first, provide a written price, and schedule the work around the homeowner’s timeline. For a full discussion of what a new gate involves, including material choices and timeline, see our Gate Installation in Pico Rivera page.
Gate Motor & Opener in Pico Rivera
Operators in Pico Rivera fail from heat and age more than anything else. A motor rated for a light suburban duty cycle over-heats during a 100°F summer week and refuses to engage. We service nine automation brands and replace motors, boards, and limit switches without steering you toward a full system swap unless it’s genuinely necessary. Read specifics on our Gate Motor & Opener in Pico Rivera page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Pico Rivera
Gate Access Control in Pico Rivera means adding keypads, phone entry, card readers, or video intercoms to gates that were built long before smart access existed. Most of the city’s wrought iron slide and swing gates date to the 1980s and 1990s, and their owners now want the convenience of opening the gate from a phone without replacing the entire operator. The inland heat bakes keypad membranes brittle and cracks wiring insulation inside metal posts, so repairs here tend to involve re-terminating corroded conductors and replacing sun-damaged components rather than swapping entire systems.
Keypad Entry
Signs you need it
You’re still handing out physical remotes to family, housekeepers, or contractors, or the existing keypad only works when you press each button hard.
What it costs in Pico Rivera
Keypad entry installation in Pico Rivera typically runs $200-$500 per keypad, depending on whether we’re wiring it into an existing operator or adding a standalone receiver.
How we do it
We mount the keypad at the driveway approach, run weather-sealed wiring to the operator, program the codes on site, and photograph the finished wiring before we leave.
Phone Entry
Signs you need it
You want visitors to call your phone from the gate and have you buzz them in, instead of sharing a code that never changes.
What it costs in Pico Rivera
Phone entry systems in Pico Rivera run $600-$1,200 for a single-door setup with cellular or internet calling, installed and programmed.
How we do it
We install the call box at the gate, wire it to the operator, set up the app or phone line, and test the call-from-gate flow before handing over the documentation.
What Gate Access Control Costs in Pico Rivera
| Item | Typical range in Pico Rivera |
|---|---|
| Keypad entry system | $200-$500 |
| Phone entry system | $600-$1,200 |
| Card reader or fob system | $400-$900 |
Does access control work with my existing gate motor in Pico Rivera?
Yes, in most cases. We wire keypads, card readers, and phone-entry systems into the operator already on your gate, regardless of brand. Call (626) 624-4196 for a written quote on your specific setup.
Can you install a video intercom on a Pico Rivera gate?
Video intercom installation starts around $800 and includes the monitor, camera unit at the gate, wiring, and programming. We’ll confirm the exact price in writing before any work begins.
Gate Parts & Welding in Pico Rivera
Gate Parts & Welding in Pico Rivera is repair work at the material level: replacing the hinge that snapped, re-welding the joint that cracked, or swapping the roller that wore down to its axle. The city’s 30-to-40-year-old wrought iron gates fail exactly where you’d expect after four decades of Santa Ana winds, summer heat, and daily use. Welding on these older gates requires matching the original metal thickness and cleaning off decades of paint and corrosion before striking an arc, which is why so many Pico Rivera jobs involve more prep than weld time.
Hinge Replacement
Signs you need it
The gate sags visibly on one side, scrapes the driveway at the latch end, or you can feel play when you lift the gate near the post.
What it costs in Pico Rivera
Hinge replacement on a Pico Rivera swing gate typically runs $150-$450 per hinge, depending on gate weight and whether the post needs reinforcement.
How we do it
We cut the old hinge off, grind the post clean, weld the new hinge in place at the correct height, and photograph the joint before painting.
Custom Welding
Signs you need it
A weld joint has cracked through, a section of the gate frame is bent, or you need a bracket or bracket repair that isn’t an off-the-shelf part.
What it costs in Pico Rivera
Custom welding in Pico Rivera runs $150-$500 per repair location, with the final number set by how much prep grinding and re-painting the job requires.
How we do it
We assess the metal, grind back to clean steel, weld the repair using material that matches the original thickness, and document every joint we touched.
What Gate Parts & Welding Costs in Pico Rivera
| Item | Typical range in Pico Rivera |
|---|---|
| Hinge replacement | $150-$450 per hinge |
| Custom welding repair | $150-$500 per location |
| Gate roller replacement | $100-$300 per roller |
Can you weld a broken gate hinge back together in Pico Rivera?
If the hinge itself snapped, welding it is almost always a temporary fix. We replace broken hinges with new steel rated for the gate’s weight and weld them in cleanly. Call (626) 624-4196 for an exact quote.
Do you fabricate custom gate parts for Pico Rivera homes?
Yes. When an odd-sized bracket or mounting plate doesn’t exist off the shelf, we cut, shape, and weld a matching part on site or in our shop. The written price covers fabrication and installation.
Brands We Service in Pico Rivera
We service LiftMaster, FAAC, BFT, and Linear operators in Pico Rivera, among others. Our trucks carry common boards, limit switches, and remotes for these brands, so most repairs don’t wait on parts. See our brands for the full list.
Pricing for Gate Repair in Pico Rivera, CA
| Service | Typical range in Pico Rivera |
|---|---|
| Keypad entry system | $200-$500 |
| Phone entry system | $600-$1,200 |
| Card reader or fob system | $400-$900 |
| Hinge replacement | $150-$450 per hinge |
| Custom welding repair | $150-$500 per location |
| Gate roller replacement | $100-$300 per roller |
| Gate motor replacement | $600-$1,800 |
| Gate opener board repair | $180-$450 |
| Slide gate track repair | $250-$700 |
| Swing gate post replacement | $400-$1,000 |
Prices in Pico Rivera are pushed upward by the age of the gate, the amount of rust removal and prep work required, and whether the concrete driveway needs patching around a bottom track. Everything we quote is written down and handed to you before any work starts, so the number we agree on is the number on the final invoice.
Neighborhoods We Serve in Pico Rivera
Our Pico Rivera crews work throughout the city, from the residential streets south of Beverly Boulevard to the commercial yards along Washington Boulevard. Most service calls in Pico Rivera get a same-day or next-day response depending on urgency and parts availability.
- Rivera Park area
- Smith Park neighborhood
- Pico Vista
- Rio Vista
- Commercial corridor along Washington Boulevard
Service Area - Cities Near Pico Rivera
We also cover surrounding cities for gate repair and installation work. See our pages for Bell Gardens, CA, Monterey Park, CA, Rosemead, CA, and El Monte, CA.
Serving Pico Rivera, CA - Our Local Coverage Area
We’re based in the Pico Rivera area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Pico Rivera
For urgent issues like a gate stuck open or a slide gate off its track, we dispatch same-day in most cases. Non-emergency repairs are typically scheduled within one to two business days. Call (626) 624-4196 and a live person will tell you exactly when a technician can arrive.
Repairs and parts replacement on an existing gate generally don’t require a permit. New gate installations or major structural changes may need city approval, and we’ll tell you if your job falls into that category before anything is scheduled.
Yes. The light-industrial corridor along Washington Boulevard keeps our commercial gate crews busy with heavy slide gates, truck-yard operators, and access control systems. Commercial pricing is quoted in writing after an on-site assessment.
If your Pico Rivera gate won’t open, sags on its hinges, or needs an access system upgrade, call (626) 624-4196. A real person answers, and the price is always in writing before we start.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pico Rivera Customers Say
"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.