Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Farm & ranch
Before
After
Before
After
Before
AfterGate Repair in Pasadena, CA
Gate access control in Pasadena usually means one of two things: a keypad or phone-entry system on a Bungalow Heaven driveway gate that has stopped talking to the motor, or a card reader and video intercom on a multi-tenant property that no longer releases the gate. The housing stock here makes the work different from flatland cities: early-1900s Craftsman gates sit on posts set in crumbling early concrete, and Santa Ana winds off the Arroyo Seco and San Gabriel Mountain canyon corridors stress every hinge, latch, and operator on the property. Call us at (626) 624-4196 for a written price before any work begins.
Why Pasadena Homes Are Different
Pasadena’s gate stock follows its architecture. In Bungalow Heaven and Madison Heights you see cedar picket gates hung on posts poured before World War II. Along Orange Grove Boulevard you see heavy wrought-iron estate gates on brick or stone piers. In the San Rafael Hills, mid-century custom homes run automatic driveway gates on slopes that put constant grade pressure on hinges and motors. The common thread is age: original gate posts across all these eras sit in deteriorating early concrete foundations, and any meaningful repair that ignores the post base is a temporary fix.
Climate compounds it. Pasadena sits at the mouth of the Arroyo Seco and several mountain canyon corridors, making it one of the most wind-exposed inland valley cities in Los Angeles County during Santa Ana events. Those gusts regularly blow wooden gates off hinges, bend lightweight aluminum frames, and overload automatic operators. The swing between 100°F-plus dry summers and periodic heavy orographic rainfall warps wood gates and corrodes hardware faster than in neighboring flatland cities. A gate contractor working Pasadena properties has to account for wind load on every panel and drainage at every post base, or the repair fails inside a year.
Then there’s the permit layer. Properties inside Pasadena’s Landmark Districts, including Bungalow Heaven, often require a Certificate of Appropriateness from the city’s Design and Historic Preservation section before structural gate changes are approved. A contractor who pulls parcel-level historic status before quoting spares the homeowner a stalled project in a review process they never saw coming.
Our Main Pasadena Services
These are the three Pasadena gate jobs we handle most, each with its own dedicated page covering local costs and the specific way the work goes in this city.
Gate Repair in Pasadena
Most repair calls in Pasadena involve sagging wood gates on old bungalow posts, bent hinges from wind events, or latch strikes that have drifted out of alignment. We document the post condition before anything else, because on early concrete foundations the post is often the actual problem, not the gate. Gate Repair in Pasadena covers hinge work, frame straightening, and post stabilization across all Pasadena neighborhoods.
Gate Installation in Pasadena
New gate installation in Pasadena frequently runs into historic overlay review, especially on properties in Bungalow Heaven or other Landmark Districts. We check parcel-level historic status before quoting so you know whether a Certificate of Appropriateness applies before you spend money on materials. Gate Installation in Pasadena covers the full process, including post replacement when the existing foundation has failed.
Gate Motor & Opener in Pasadena
Santa Ana wind gusts overload automatic gate operators faster in Pasadena than almost anywhere else in the inland valley. We service nine automation brands including LiftMaster, FAAC, and BFT, and we diagnose the motor and the mechanical gate together, because in wind-exposed locations the two fail as a system. Gate Motor & Opener in Pasadena covers full diagnostics, limit-switch work, and replacement when the operator has burned out.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Pasadena
Gate access control in Pasadena means the keypad, phone entry, card reader, or video intercom that tells the gate motor when to open. On older Pasadena properties the wiring was often installed decades ago and spliced repeatedly, and on newer systems the failure is usually a misaligned antenna or a power supply that has quietly failed. Under Haven Standard Clause 4, every visit leaves you a photographed record of what was found, what was set, and what was installed. Our Gate Access Control hub covers the full range of systems we work on.
Keypad Entry
Signs you need it
The keypad works intermittently, certain codes stop working, or the keypad lights up but the gate doesn’t move.
What it costs in Pasadena
Keypad replacement in Pasadena typically runs $200-$550 depending on whether we’re replacing just the keypad or the keypad plus its controller board.
How we do it
We trace the keypad circuit back to the control board, name the failed component, replace it, and photograph the new wiring before we leave.
Phone Entry
Signs you need it
Callers can’t hear you through the entry system, the gate doesn’t release when you press the button, or the system dials but never connects.
What it costs in Pasadena
Phone entry diagnostics and repair in Pasadena run $180-$400 for most systems, depending on whether the fault is in the phone module, the relay, or the wiring run.
How we do it
We test the relay output at the control board, confirm the phone module is actually signaling it, and replace or rewire the failed leg with a written record of the part numbers installed.
What Gate Access Control Costs in Pasadena
| Item | Typical range in Pasadena |
|---|---|
| Keypad replacement | $200-$550 |
| Phone entry diagnostics and repair | $180-$400 |
| Access control component repair (board, relay, power supply) | $250-$600 |
Can you add a keypad to an existing Pasadena gate?
Yes. We wire the keypad into your existing control board on almost any LiftMaster, FAAC, BFT, or Linear operator already on the property. The price is quoted and agreed before any work starts. Call (626) 624-4196 to schedule a look.
Do access control repairs in Pasadena require a permit?
Low-voltage access control work does not normally require a city permit in Pasadena, but if the job includes structural post or gate changes inside a Landmark District, historic review may apply. We check parcel status before quoting. Call (626) 624-4196 with your address.
Gate Parts & Welding in Pasadena
Gate parts and welding in Pasadena centers on two realities: ornamental wrought iron has been rusting for decades in a climate that swings from 100°F dry heat to heavy orographic rain, and original posts are frequently set in early concrete that has cracked and lost its grip. Welding a hinge back onto a rotted post buys you a month; replacing the post and then welding the hinge is the repair that lasts. Every job under Gate Parts & Welding leaves you with a documented photo record, per Haven Standard Clause 4.
Hinge Replacement
Signs you need it
The gate drags on the latch side, the hinge pin has worn oval, or you can see daylight through the hinge leaf where it meets the post.
What it costs in Pasadena
Hinge replacement in Pasadena typically runs $150-$350 per hinge depending on the gate weight and whether the post needs reinforcement.
How we do it
We support the gate, cut or unbolt the failed hinge, weld or bolt in a rated replacement, and photograph the set position before we leave.
Post Replacement
Signs you need it
The post leans, the gate sags no matter how many times the hinges are adjusted, or the concrete base around the post is cracked and crumbling.
What it costs in Pasadena
Post replacement in Pasadena runs $350-$800 for a standard steel or wood post set in new concrete, depending on depth and whether the old foundation has to be fully removed.
How we do it
We cut the old post free, excavate the failed concrete, set a new post plumb in a proper footer, and document the depth and materials used.
What Gate Parts & Welding Costs in Pasadena
| Item | Typical range in Pasadena |
|---|---|
| Hinge replacement | $150-$350 per hinge |
| Post replacement | $350-$800 |
| Custom welding repair (cracked frame, broken picket) | $180-$450 |
Can you weld a broken wrought-iron gate on site in Pasadena?
Yes. We run mobile welding for cracked frames, broken pickets, and separated scrollwork. The repair is photographed, the weld is ground clean, and the price is written before we strike an arc. Call (626) 624-4196 to describe what broke.
Do you replace gate rollers on Pasadena sliding gates?
Yes. We replace worn rollers, adjust the track, and set the gate back on line. Sliding gates on Pasadena’s sloped lots wear rollers unevenly, so we check track alignment at every service. Call (626) 624-4196 for a written quote.
Brands We Service in Pasadena
We work on LiftMaster, FAAC, BFT, and Linear systems, along with five other major automation brands, and we stock common parts locally for faster turnaround. If the motor on your Pasadena gate is from a brand we know, we can usually have the part that failed in hand within a day or two. See our brands for the full list.
Pricing for Gate Repair in Pasadena, CA
| Service | Typical range in Pasadena |
|---|---|
| Keypad replacement | $200-$550 |
| Phone entry diagnostics and repair | $180-$400 |
| Access control component repair | $250-$600 |
| Hinge replacement | $150-$350 per hinge |
| Post replacement | $350-$800 |
| Custom welding repair | $180-$450 |
| Gate roller replacement | $200-$500 |
| Rail repair | $250-$600 |
Two things push Pasadena prices above the flatland average: historic post foundations that need to be excavated rather than shimmed, and the wind load that means every hinge and latch has to be overrated for the gusts off the Arroyo Seco. The price we write before work starts is the price you pay; nothing gets added after the fact.
Neighborhoods We Serve in Pasadena
We work across every part of Pasadena, from the Landmark District bungalows to the hillside driveways that demand a heavier hinge spec. Most calls inside Pasadena are reached within about 45 to 60 minutes depending on traffic, and emergency response is available 24/7 with a live person on the phone at any hour.
- Bungalow Heaven
- Madison Heights
- San Rafael Hills
- Orange Grove Boulevard corridor
- Linda Vista
Service Area - Cities Near Pasadena
Besides Pasadena itself, we cover the surrounding San Gabriel Valley corridor for gate repair and access control work. That includes Altadena, CA to the north, San Gabriel, CA to the south, Alhambra, CA to the southwest, and Rosemead, CA just south of that. Dispatch and scheduling are coordinated from our Los Angeles office; crews serve Pasadena locally.
Serving Pasadena, CA - Our Local Coverage Area
We’re based in the Pasadena area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Pasadena
Most Pasadena calls are reached within 45 to 60 minutes depending on traffic and where in the city you are. A live person answers at (626) 624-4196 24 hours a day, so you can describe the problem and get a dispatch time without waiting for a callback.
If your property sits inside a Landmark District such as Bungalow Heaven, structural gate changes may require a Certificate of Appropriateness from the city’s Design and Historic Preservation section. We pull parcel-level historic status before quoting so you know what applies before spending on materials. Low-voltage repairs and most like-for-like hardware work typically do not trigger review.
We can give an honest range over the phone based on what you describe and what we know about the housing stock in your neighborhood. The written price comes after a technician looks at the gate and the post, but the price is handed to you before any work begins and it does not change after the fact.
If your Pasadena gate is sagging, stuck, or ignoring its keypad, call (626) 624-4196 for a free estimate and a written price before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pasadena Customers Say
"Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B.