Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Farm & ranch
Before
After
Before
After
Before
AfterGate Repair in Tujunga, CA
Gate access control problems in Tujunga are different from anywhere else in the Valley because of the canyon wind and the old footings under the gates themselves. Most of the homes here were built in the 1940s through 1960s, with swing gates set into minimal concrete that was never engineered for automated operators or the concentrated Santa Ana gusts that funnel out of Big Tujunga Canyon. We repair and service every part of that system: keypads, remotes, phone entry, card readers, hinges, posts, rails, and welds, with a written price handed over before any work starts. Call (626) 624-4196 and a live person answers, any hour.
Why Tujunga Homes Are Different
Tujunga sits at the mouth of Big Tujunga Canyon, and that geography is the single biggest factor in how gates fail here. Santa Ana events hit Tujunga harder than Burbank or the flat Valley floor, with gusts that warp wooden gates, bend aluminum frames, and shear motor mounts on automatic operators seasonally. The housing stock compounds the problem: modest 1940s-1960s foothill bungalows on larger, semi-rural lots, many with original wood-frame or wrought-iron swing gates set into shallow concrete that was poured long before automation existed. Sloped driveways create ongoing grade-alignment issues for both swing and slide hardware.
Then there is the drainage corridor. Properties backing up to the Tujunga Wash have a history of silent footing movement from post-Station Fire debris flows. A gate can look plumb from the street and still be sitting on cracked or tilted footings that guarantee repeat hinge and post failures. And because Tujunga is designated a Very High Fire Hazard Severity Zone under Los Angeles fire code, many repairs require bringing older gate setups into VHFHSZ emergency-access compliance before the mechanical work can be finished.
Our Main Tujunga Services
Two jobs dominate Tujunga call volume: gate access control retrofits on older gates, and the parts-and-welding work that keeps the physical gate itself standing under canyon wind loads.
Gate Repair in Tujunga
When a Tujunga gate stops opening, the cause is usually one of three things: a footing that shifted decades ago, a hinge that the Santa Ana cycle finally tore loose, or a motor mounting point that cracked under repeated gust loading. We find the failure, photograph it, and fix it, with the written price in your hand before the tool comes out. Full detail is on Gate Repair in Tujunga.
Gate Installation in Tujunga
New gate work in Tujunga means engineering for the wind corridor, not just setting posts and hanging a panel. We dig footings sized for the soil and the canyon exposure, align the gate to the existing grade, and bring the design into VHFHSZ access compliance where the fire code requires it. See Gate Installation in Tujunga for the full scope.
Gate Motor & Opener in Tujunga
Automatic operators on Tujunga gates fail most often at the mount and the limit switch, because the wind pushes the gate farther than the operator was ever set to travel. We service LiftMaster, FAAC, BFT, Linear, and five other automation brands, resetting limits and re-anchoring mounts rather than defaulting to replacement. The complete breakdown is on Gate Motor & Opener in Tujunga.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Tujunga
Gate access control in Tujunga is the retrofit work that brings 1940s-1960s gates up to modern entry standards. Older foothill homes were built with a latch and a key, not a keypad or a phone entry system, and the canyon wind corridor means any new access hardware has to be mounted and sealed for gust exposure that the flat Valley never sees. We install and repair keypads, remotes, phone entry, card readers, and video intercoms, and we document every setting and wire path before we leave. Our full access control service line is covered on our Gate Access Control page.
Keypad Entry
Signs you need it
The keypad is unresponsive, the code is worn off the buttons, or the unit has been exposed to canyon wind-blown grit and moisture long enough to short internally.
What it costs in Tujunga
Keypad repair in Tujunga typically runs $145-$320; full keypad replacement is $320-$600 depending on brand and mounting surface.
How we do it
We test the circuit at the keypad and at the operator, confirm the code path, replace or repair the unit, and photograph the final wiring and programmed settings.
Video Intercom
Signs you need it
The call button rings nothing, the video feed is dead or shows a black screen, or the intercom works only intermittently after rain or high wind.
What it costs in Tujunga
Video intercom repair runs $185-$425; a full replacement with new camera and indoor monitor is $700-$1,700 installed.
How we do it
We trace the signal path from the outdoor station to the indoor monitor, replace or repair the failed component, and leave you with a photo record of the connection points.
What Gate Access Control Costs in Tujunga
| Item | Typical range in Tujunga |
|---|---|
| Keypad repair | $145-$320 |
| Video intercom repair | $185-$425 |
| Video intercom replacement | $700-$1,700 |
Can you bring a Tujunga gate intercom back after a rain event?
Usually yes. Moisture intrusion is the most common failure on intercoms here, and we repair the affected circuit or corroded connection rather than defaulting to replacement. Call (626) 624-4196 with the symptoms and we will diagnose it.
Does a VHFHSZ designation change what access hardware is allowed in Tujunga?
It can. Emergency-access requirements in Tujunga’s Very High Fire Hazard Severity Zone sometimes govern the type of keypad or entry override that must be installed. Our written quote will list any code-driven items before work starts.
Gate Parts & Welding in Tujunga
Parts and welding work in Tujunga is mostly about what the wind and the footings have done to the physical gate. Santa Ana gusts load the hinges and the post anchors in one violent direction, and when a footing has been slowly shifting under a Tujunga Wash property for years, the gate frame carries stress it was never built to absorb. We replace hinges, reset or replace posts, repair slide rails, weld cracked frames, and swap worn rollers, and every completed job includes a photographed record of the part and the setting. For the full parts and fabrication scope, see our Gate Parts & Welding page.
Hinge Replacement
Signs you need it
The gate sags visibly, scrapes the concrete at the latch end, or the hinge pin is deformed from repeated wind loading.
What it costs in Tujunga
Hinge replacement in Tujunga runs $85-$210 per hinge depending on gate weight and whether the mounting plate needs weld reinforcement.
How we do it
We lift the gate to its correct height, verify the post footings are still sound, install the new hinges, and photograph the final gate alignment.
Post Replacement
Signs you need it
The post leans, the gate drifts at the latch after every wind event, or the concrete footing shows visible cracking at the base.
What it costs in Tujunga
Post replacement runs $350-$900 per post, including new concrete sized for the Tujunga wind load and the existing soil conditions.
How we do it
We remove the old post, drill and pour a new footing, set the post plumb, re-hang the gate, and photograph the complete installation.
What Gate Parts & Welding Costs in Tujunga
| Item | Typical range in Tujunga |
|---|---|
| Hinge replacement (per hinge) | $85-$210 |
| Post replacement (per post) | $350-$900 |
| Custom welding repair | $150-$500 |
Can you weld a cracked Tujunga gate frame without replacing the whole gate?
In most cases yes. We grind the crack, weld the joint, and add reinforcement where needed. The exception is severe rust or metal fatigue across the frame, which our written quote will flag before any work begins.
How long does a post replacement take in Tujunga?
Most single-post replacements are done in one day; concrete cure time before full automation load is typically 48-72 hours. We will tell you the exact sequence and timing in the written quote.
Brands We Service in Tujunga
We service LiftMaster, FAAC, BFT, and Linear, along with five other major automation brands, so the motor already on your Tujunga gate is one we can work on. Common parts for these brands are stocked in our dispatch inventory, which keeps most repairs to a single visit. See our brands for the complete list.
Pricing for Gate Repair in Tujunga, CA
| Service | Typical range in Tujunga |
|---|---|
| Keypad repair | $145-$320 |
| Keypad replacement | $320-$600 |
| Video intercom repair | $185-$425 |
| Video intercom replacement | $700-$1,700 |
| Hinge replacement (per hinge) | $85-$210 |
| Post replacement (per post) | $350-$900 |
| Rail repair | $200-$600 |
| Custom welding repair | $150-$500 |
| Gate roller replacement | $120-$400 |
What pushes a Tujunga quote higher than the same job elsewhere is the footing work: when a post has to be dug out and re-poured because the original concrete was undersized or cracked by Wash-area ground movement, the material and labor add up. Every price is written down and handed to you before any work starts, with no surprise invoice at the end.
Neighborhoods We Serve in Tujunga
We run calls across all of Tujunga, from the hillside streets off Foothill Boulevard down to the flatter blocks near Apperson and the Tujunga Wash corridor. Dispatch coordinates from our Los Angeles office, and crews are in Tujunga daily.
- Foothill Boulevard corridor
- Tujunga Wash foothill properties
- Streets off Apperson Street
- Haines Canyon area
- Sunland-Tujunga border blocks
Service Area - Cities Near Tujunga
We also serve the communities around Tujunga, including Burbank, CA, Sun Valley, CA, North Hollywood, CA, and Altadena, CA. Same dispatch team, same written-price policy on every job.
Serving Tujunga, CA - Our Local Coverage Area
We’re based in the Tujunga area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Tujunga
Live dispatch is available 24 hours a day, and Tujunga is a daily service area, so most emergency calls are scheduled the same day you reach us. Call (626) 624-4196 and a person answers, not a voicemail queue.
Most part replacements and access control retrofits do not require a permit, but new gate installations and some post replacements in the VHFHSZ can trigger a fire code review. We will tell you in the written quote if anything needs city approval.
For most repairs, the written price is delivered on site after diagnosis, before any work begins. For larger installs, we provide a written scope and price before scheduling. You will never be asked to approve work without seeing the number first.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Tujunga Customers Say
"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.